top of page
Positioner-POWERGENEX-EPR.jpg

Power Genex:
Electro Pneumatic Positioner (EPR)

คุณสมบัติ

  • RotaryType

  • • ดูแลรักษาง่าย

  • • Calibrate ได้อย่างแม่นยำด้วยการปรับ SPAN และ ZERO อย่างง่าย

  • • การแปลงอย่างง่ายเป็น Direct acting หรือ Reverse acting

  • • 1/2 split range available

  • • ตัวเรือนอะลูมิเนียมที่ทนทานพร้อมการเคลือบป้องกันการกัดกร่อน

  • • การออกแบบที่ทนต่อแรงสั่นสะเทือน

  • • เกจสแตนเลสมาตราฐาน

  • • รวมชุด Pilot valve สำหรับ actuator ขนาดเล็ก

สเปคของสินค้า

  • Input Signal: 4-20 mA DC

  • Input Resistance: 235±15Ω

  • Air Supply: Max. 7.0 bar (100 psi) free of oil,water,and moisture

  • Operating Angle: 60-100°

  • Pneumatic Connections: PT(Rc) 1/4 or NPT 1/4

  • Electrical Connections: PF(G) 1/2 or NPT 1/2

  • Protection Class: Ex dmb IIB+H2 T6 / Ex dmb IIC T61T5 Ex ia IIC T6 / IP66

  • Ambient Temperatura: -20 to +70°C

  •  Pressure Gauge: Stainless steel

  • Output Characteristics: Linear

  • Linearity: Wrthin ±1.0 % F.S(Single type), Within ±1.5% F.S(Double type)

  • Sensitivity: Within ±0.2 % F.S(Single type), Within ±0.5 % F.S(Double type)

  • Hysteresis: Within 1.0 % F.S

  • Repeatability: Within ±0.5% F.S

  • Air ConS1Jmption: 5 LPM (Sup.1.4 kgf/cm<sup>3</sup>)

  •  Flow Capacity: 80 LPM (Sup. 1.4 kgf/cm<sup>3</sup>)

  • Material: Aluminum die-cast

  • Weight: 3.5 kg (with terminal box), 3.2 kg (without terminal box)

POWERGENEX-EPL.jpg

Power-Genex:

Electro Pneumatic Positioner (EPL)

คุณสมบัติ

  • Linear Type

  • • ดูแลรักษาง่าย

  • • Calibrate ได้อย่างแม่นยำด้วยการปรับ SPAN และ ZERO อย่างง่าย

  • • การแปลงอย่างง่ายเป็น Direct acting หรือ Reverse acting

  • • 1/2 split range available

  • • ตัวเรือนอะลูมิเนียมที่ทนทานพร้อมการเคลือบป้องกันการกัดกร่อน

  • • การออกแบบที่ทนต่อแรงสั่นสะเทือน

  • • เกจสแตนเลสมาตราฐาน

  • • รวมชุด Pilot valve สำหรับ actuator ขนาดเล็ก

สเปคของสินค้า

  • Input Signal: 4-20 mA DC

  • Input Resistance: 235±15Ω

  • Air Supply: Max. 7.0 bar (100 psi) free of oil,water,and moisture

  • Standard Stroke: 10-8Omm

  • Pneumatic Connections: PT(Rc) 1/4 or NPT 1/4

  • Electrical Connections: PF(G) 1/2 or NPT 1/2

  • Protection Class: Ex dmb IIB+H2</sub> T6 / Ex dmb IIC T61T5 Ex ia IIC T6 / IP66

  • Ambient Temperatura: -20 to +70°C

  • Pressure Gauge: Stainless steel

  • Output Characteristics: Linear

  • Linearity: Within ±1.0 % F.S(Single type), Within ±1.5% F.S(Double type)

  • Sensitivity: Within ±0.2 % F.S(Single type), Within ±0.5 % F.S(Double type)

  • Hysteresis: Within 1.0 % F.S

  • Repeatability: Within ±0.5% F.S

  • Air Connsumption: 5 LPM (Sup.1.4 kgf/cm<sup>3</sup>)

  • Flow Capacity: 80 LPM (Sup. 1.4 kgf/cm<sup>3</sup>)

  • Material: Aluminum die-cast

  • Weight: 3.3 kg (with terminal box), 3.0 kg (without terminal box)

POWERGENEX-SmartPositionerExProof-SS2.jpg

Power-Genex:

Smart Positioner (SS2)

คุณสมบัติ

  • • มีหน้าจอแสดงผล ติดตั้งบน actuators ขนาดเล็กได้

  • • Auto-Calibrateที่ง่ายและรวดเร็ว

  • • การตรวจจับ RA (การย้อนกลับ) หรือ DA (การทำงานโดยตรง) โดยอัตโนมัติโดยไม่คำนึงถึงการเชื่อมต่อ supply ลมที่ไม่ถูกต้อง

  • • ใช้ได้สำหรับการ Single acting หรือ Double acting โดยไม่ต้องปรับแต่งพิเศษใดๆ

  • • การออกแบบที่กะทัดรัดช่วยให้สามารถติดตั้งบน actuator ขนาดเล็กได้

  • • สามารถทดสอบ actuator ด้วยสัญญาณคงที่ภายใต้โหมดทดสอบ

  • • ช่วงอุณหภูมิการทำงานกว้าง -30 +80 C

  • • ปริมาณการใช้ลมต่ำ

  • • ให้ตัวยึดสำหรับยึดตามมาตรฐาน IEC 60534-6-1 สำหรับ linear valves

  • • รองรับรูปแบบการติดตั้ง NAMUR IEC 60534-6-2 (VDI/VDE 3845) และให้ตัวยึดสำหรับยึดหลายขนาดสำหรับวาล์วโรตารี่

สเปคของสินค้า

  • Output position transmitter (4-20 mA)

  • 2 x alarm limit or micro switch (SPDT)

  • HART communication

  • Profibus communication

POWERGENEX-SmartValvePositionerExProof.j

Power-Genex:

Smart Positioner Explosion proof (SS3)

คุณสมบัติ

  • • Flameproof IECEx / ATEX / KC Ex d IIC T6

  • • Auto-Calibrateที่ง่ายและรวดเร็ว

  • • การตรวจจับ RA (การย้อนกลับ) หรือ DA (การทำงานโดยตรง) โดยอัตโนมัติโดยไม่คำนึงถึงการเชื่อมต่อ supply ลมที่ไม่ถูกต้อง

  • • ใช้ได้สำหรับการ Single acting หรือ Double acting โดยไม่ต้องปรับแต่งพิเศษใดๆ

  • • การออกแบบที่กะทัดรัดช่วยให้สามารถติดตั้งบน actuator ขนาดเล็กได้

  • • สามารถทดสอบ actuator ด้วยสัญญาณคงที่ภายใต้โหมดทดสอบ

  • • ช่วงอุณหภูมิการทำงานกว้าง -30 +80 C

  • • ปริมาณการใช้ลมต่ำ

  • • ให้ตัวยึดสำหรับยึดตามมาตรฐาน IEC 60534-6-1 สำหรับ linear valves

  • • รองรับรูปแบบการติดตั้ง NAMUR IEC 60534-6-2 (VDI/VDE 3845) และให้ตัวยึดสำหรับยึดหลายขนาดสำหรับวาล์วโรตารี่

สเปคของสินค้า

  • Output position transmitter (4-20 mA)

  • 2 x alarm limit or micro switch (SPDT)

  • HART communication

  • Profibus communication

bottom of page